Applications

Solution

Correctional facility security

One automated system for vehicles, people, the perimeter and the sky. Every module reports to a single platform with an interactive map, so the operator sees the situation, not just an alarm.

What the system covers

Two types of facility

Type 1. Urban facility

A main building with exercise yards inside the city.

  • Vehicle underbody inspection at entry and exit, with scan history
  • Visitor registration with a badge and a tamper-proof wristband
  • Duo-ID for staff
  • AI video in the exercise yards: crowds, abandoned objects, unusual activity
  • Detection of unknown drones

Type 2. Large closed complex

A double perimeter with residential, administrative and production buildings. Everything in Type 1, plus:

  • Buffer-zone control: sensors on both fences, thermal and AI cameras, location and direction of the intruder
  • Autonomous patrol: drones launch on alarm and check sites at night with a thermal camera
  • Control of workers and contractors: permitted zones, shift schedules, access violations
  • Monitoring of production areas: abandoned objects, unusual activity, people outside their zone or hours

Modules

UVIS

Automatic vehicle underbody inspection

Scanners at the entry and exit compare the state of each vehicle before and after its time inside the facility.

Capabilities

  • High-resolution underbody image
  • Suspicious areas highlighted automatically
  • Comparison with earlier scans of the same vehicle
  • Every result tied to the number plate, date and time, with a full entry and exit history

Scenario

There is an object under a vehicle that was not there at the previous inspection. The system highlights the area on screen and tells the operator a further check is needed.

Duo-ID

Access control and identification

Staff carry two independent identifiers: an ID badge and an active tag. A person is “authorised” only when both are detected together. Visitors are registered and receive a badge and a tamper-proof wristband. For inmates, paper passes are replaced by badges and wristbands with permitted zones for each part of the daily schedule.

Capabilities

  • Badge and tag must stay together
  • Location shown on the interactive map
  • Permitted and forbidden zones, work schedules
  • History of movements and alarms

Scenarios

  1. Someone leaves a jacket with the badge and walks away. The system registers that badge and tag have separated.
  2. Someone tries to remove a wristband. A silent alarm goes off, the operator gets the last known position and the nearest cameras, and can send a drone.
  3. An employee leaves the permitted zone or appears in production outside their shift. The operator is alerted and sees it on the map.

AI Video

Intelligent video surveillance

Existing cameras and additional AI cameras work as one system. On a suspicious event the operator gets an alert, the recording and the location. Exercise yards, production halls, stores and restricted areas get particular attention.

Capabilities

  • Detection and classification of people, vehicles and objects
  • Crowds and unusual activity
  • Unattended objects and new objects in controlled zones
  • Tracking of movement

Perimeter

Buffer zone and perimeter

Fence sensors, thermal cameras, AI video and motion detection are combined. The task is not just to register a sensor going off, but to show where the person is and which way they are moving. In the buffer zone between the outer and inner fence, any movement is an alarm.

Capabilities

  • Intrusion sensors on both fences
  • Thermal cameras along the buffer zone
  • AI cameras covering the whole strip
  • Central processing that matches signals
  • Integration with autonomous patrol drones
OutsideOuter fence with sensorsBuffer zone: any movement is an alarmThermal + AI cameraThermal + AI cameraInner fence with sensorsFacilitySection and directionLaunch on alarm, thermalDrone stationOperator map: section, video, drone check

Night intrusion

  1. A person enters the buffer zone.
  2. A fence sensor fires or a camera detects movement.
  3. The thermal camera confirms a person is present.
  4. The system determines the section and the direction of movement.
  5. The operator gets the alarm with video confirmation.
  6. If needed, a drone with a thermal camera launches from the nearest station.
  7. The operator watches the situation until the response team arrives.

Anti-Drone

Detection of unknown drones

Several independent detection channels watch the airspace above the facility.

Capabilities

  • RF detection: control and data radio signals of the drone
  • Passive radar: detection and tracking without active emission
  • EO/IR: visual and thermal confirmation of the target

Scenario

An unknown drone appears over an exercise yard. The system detects it, shows the event on the map and passes it to the operator, who decides what to do: suppress the control link, bring it down with a net launcher, or counter it.

Drone-in-a-Box

Autonomous drone stations

Stations store, launch, land and charge the drones on their own. Remote sections can run on solar panels and batteries. Flight zones and altitudes are agreed with the customer, and a licensed operator is in charge.

Capabilities

  • Scheduled patrols with images for change detection
  • Automatic launch on alarm, without the operator
  • Checks of triggered sensor sections
  • Night observation with a thermal camera, video to the control room
  • Automatic return, charging and remote health monitoring

Drone, preliminary

Flight time
35–50 min
Patrol radius
2–5 km
Main camera, optical zoom
4K · 20–30×
Thermal camera
640 × 512

Scenario

An outer-perimeter sensor fires. The drone flies to the spot on its own and checks it. If someone is approaching without authorisation, the operator gets an alert with photos and video, including number plates and faces, and decides whether to keep tracking or use light and sound signals to tell them to leave.

SOC / C2

One control platform

All subsystems run in one security platform. Data is processed on the facility’s own servers, with no external cloud. For every incident the time, alarm, video, drone route and operator actions are kept. The system is built not only for fast response but also to prevent incidents, by noticing preparation: unusual movement of people, changes to the ground and surroundings.

Capabilities

  • Interactive map of the whole facility
  • Positions of staff and visitors
  • Cameras, sensors, scanners and drones in one place
  • Real-time alarms, central video and archive
  • Automatic correlation between subsystems
  • Incident history, reports, equipment health
  • Several facilities on one platform

Pilot configuration

We start with one facility and scale from there. Final quantities are set after the site survey.

Underbody scanners
1–2 sets
Autonomous drone stations
2
Drones
4
Cameras
Existing ones integrated, plus AI cameras
Thermal cameras
After the survey
Fence sensors
By perimeter length
Servers
Main server with redundancy
Operator workstation
1 set
Duo-ID
By number of users
Interactive map
The whole facility

During the pilot we measure the time from alarm to launch and to visual confirmation, the share of confirmed and false alarms, and system availability.

How we implement it

  1. Site survey

    Infrastructure, existing security systems, entry points, fences and control zones.

  2. Design

    Architecture, equipment selection, mounting points and integration plan. 4–6 weeks.

  3. Delivery and installation

    Scanners, cameras, sensors, servers and drone stations.

  4. Software integration

    Subsystems connected, platform, analytics and alarm scenarios set up. Delivery and integration take 4–8 weeks.

  5. Training and commissioning

    System testing, scenario checks and operator training.

  6. Maintenance

    Equipment monitoring, scheduled service, updates and support.

A pilot on two facilities

Give us one facility of each type, one in a city and one outside it, and we will propose a test installation within an agreed budget. A technical specialist can come on an agreed date to consult with your technical staff.

Request a consultation

Parameters are preliminary and are confirmed by testing. Certificates and flight permits are arranged for the specific configuration and site. Legal and regime requirements are set by the customer, and the system is configured to them.